Electrochemical water splitting by a bidirectional electrocatalyst.

The presence of efficient energy storage and conversion technologies is essential for the future energy infrastructure. Here, we describe crafting a heterostructure composed of a suitably interlinked CeO2 and polycrystalline Bi2O3 dopant prepared on a reduced graphene oxide (Ce_Bi2O3@rGO) surface. This material exhibits exceptional electrocatalytic hydrogen and oxygen evolution reaction in alkaline water (pH∼14.0) to trigger the full water-splitting cycle as a Janus catalyst. The stepwise catalyst preparation and electrochemical cell assembly for simultaneous hydrogen and oxygen evolution have been narrated. For complete details on the use and execution of this protocol, please refer to Aziz et al. (2022).1.

Microbial Fuel Cell-Based Biological Oxygen Demand Sensors for Monitoring Wastewater: State-of-the-Art and Practical Applications.

Environmental pollution has been a continuous threat to sustainable development and global well-being. It has become a significant concern worldwide to combat the ecological crisis using low-cost innovative technologies. Biological oxygen demand (BOD) is a key indicator to comprehend the quality of water to guarantee environmental safety and human health; however, none of the present technologies are capable of online monitoring of the water at the source. Microbial fuel cells (MFC) are a promising technology for simultaneous power generation and wastewater treatment. MFCs have also been shown in fascinating applications to measure and detect the toxic pollutants present in wastewater. These are the bioreactors where exoelectrogenic microorganisms catalyze the conversion of the inherent chemical energy stored in organic compounds to electrical energy. Sensors employ energy conversion to measure BOD, which is considered an international index for the detection of organic material load present in wastewater. The MFC-based BOD sensors have gone through a wide range of advancement from mediator to mediator-less, double chamber to single-chamber, and large size to miniature. There have been detailed studies to improve the accuracy and reproducibility of the sensors for commercial applications. Additionally, multistage MFC-based BOD biosensors and miniature MFC-BOD sensors have also been ubiquitous in recent years. A considerable amount of work has been carried out to improve the performance of these devices by fabricating the proton exchange membranes and altering catalysts at the cathode. However, there remains a dearth for the fabrication of the devices in aspects like suitable microbes, proton exchange membranes, and cheaper catalysts for cathodes for effective real-time monitoring of wastewater. In this review, an extensive study has been carried out on various MFC-based BOD sensors. The efficiency and drawbacks associated with the different MFC-based BOD sensors have been critically evaluated, and future perspectives for their development have been investigated. The breadth of work compiled in this review will accelerate further research in MFC-based BOD biosensors. It will be of great importance to broad ranges of scientific research and industry.

Ozone pre-treatment of molasses-based biomethanated distillery wastewater for enhanced bio-composting.

Composting is a biological process in which the organic matter is degraded by the mixed population of microorganisms in a moist aerobic environment to more stable and humidified end products. The composting process involves an interaction between the organic waste, microorganisms, moisture and oxygen. The molasses-based biomethanated distillery wastewater is presently effectively utilized with sugarcane pressmud through the composting process. The aim of present work was to evaluate the effect of ozone pretreatment on the rate of composting process and the quality of compost obtained. The GC-MS & FTIR analysis of ozone pretreated wastewater indicated the degradation and/or transformation of the organic compounds to simpler compounds present in the wastewater. Composting was performed by mixing fixed weight ratios of pressmud and different ratios of ozone pretreated wastewater (1:3, 1:4 and 1:5). The composting process was found to occur faster in the ozone pretreated wastewater for all the ratios as compared to the untreated wastewater. The final compost characteristics were found to be optimum for the 1:3 and 1:4 ratios of pressmud and wastewater. The bio-oxidative phase duration of composting has been reduced for the ozone pretreated wastewater.

Nano catalytic ozonation of biomethanated distillery wastewater for biodegradability enhancement, color and toxicity reduction with biofuel production.

The effectiveness of O3, O3/Fe2+, and O3/nZVI processes on biomethanated distillery wastewater (BMDWW) was evaluated in terms of biodegradability index (BI) enhancement, biofuel production, COD, color & toxicity reduction. A significant increase in biodegradability, COD, color and toxicity reduction was observed in O3/nZVI compared with O3, O3/Fe2+ due to more hydroxyl radical production. The O3/nZVI pretreated wastewater with enhanced BI (up to 0.71) showed 60% COD removal with additional biogas generation (64% methane content). From the Gas Chromatography Mass Spectrometry (GC-MS) analysis, 18 foremost organic compounds were predominantly detected in the raw distillery wastewater. The disappearance of the corresponding FTIR (Fourier Transform Infrared Spectroscopy) & GC-MS spectra during pretreatment processes signified the degradation or transformation of the recalcitrant present in the distillery wastewater. Subsequent (AnO + AO, AO) of pretreated BMDWW resulted in biodegradation rate enhancement by (1.83, 1.67), (3.5, 2.4) and (4.7, 2.9) times for O3, O3/Fe2+ and O3/nZVI processes respectively.

Treatment of pharmaceutical industrial wastewater by nano-catalyzed ozonation in a semi-batch reactor for improved biodegradability.

The study reports the biodegradability enhancement of pharmaceutical wastewater along with COD (Chemical Oxygen Demand) color and toxicity removal via O3, O3/Fe2+, O3/nZVI (nano zero valent iron) processes. Nano catalytic ozonation process (O3/nZVI) showed the highest biodegradability (BI = BOD5/COD) enhancement of pharmaceutical wastewater up to 0.63 from 0.18 of control with a COD, color and toxicity removal of 62.3%, 93% and 82% respectively. The disappearance of the corresponding Fourier transform infrared (FTIR) and gas chromatography-mass spectrometry (GC-MS) peaks after pretreatment indicated the degradation or transformation of the refractory organic compounds to more biodegradable organic compounds. The subsequent aerobic degradation study of pretreated pharmaceutical wastewater resulted in biodegradation rate enhancement of 5.31, 2.97, and 1.22 times for O3/nZVI O3/Fe2+ and O3 processes respectively. Seed germination test using spinach (Spinacia oleracea) seeds established the toxicity removal of pretreated pharmaceutical wastewater.

Catalytic ozone pretreatment of complex textile effluent using Fe2+ and zero valent iron nanoparticles.

The study investigates the effect of catalytic ozone pretreatment via Fe2+ and nZVI on biodegradability enhancement of complex textile effluent. The nZVI particles were synthesized and characterized by XRD, TEM and SEM analyses. Results showed that nano catalytic ozone pretreatment led to higher biodegradability index (BOD5/COD = BI) enhancement up to 0.61 (134.6%) along with COD, color and toxicity removal up to 73.5%, 87%, and 92% respectively. The disappearance of the corresponding GCMS & FTIR spectral peaks during catalyzed ozonation process indicated the cleavage of chromophore group and degradation of organic compounds present in the textile effluent. Subsequent aerobic biodegradation of nZVI pretreated textile effluent resulted in maximum COD and color reduction of 78% and 98.5% respectively, whereas the untreated effluent (BI = 0.26) indicated poor COD and color reduction of only 31% and 33% respectively. Bio-kinetic parameters also confirmed the increased rate of bio-oxidation at enhanced BIs. Seed germination test using seeds of Spinach (Spinacia oleracea), indicated the effectiveness of nano catalyzed ozone pretreatment in removing toxicity from contaminated textile effluent.

Comparison of coagulation, ozone and ferrate treatment processes for color, COD and toxicity removal from complex textile wastewater.

In this study, the comparative performance of coagulation, ozone, coagulation + ozone + coagulation and potassium ferrate processes to remove chemical oxygen demand (COD), color, and toxicity from a highly polluted textile wastewater were evaluated. Experimental results showed that ferrate alone had no effect on COD, color and toxicity removal. Whereas, in combination with FeSO4, it has shown the highest removal efficiency of 96.5%, 83% and 75% for respective parameters at the optimal dose of 40 mgL-1 + 3 ml FeSO4 (1 M) in comparison with other processes. A seed germination test using seeds of Spinach (Spinacia oleracea) also indicated that ferrate was more effective in removing toxicity from contaminated textile wastewater. Potassium ferrate also produces less sludge with maximum contaminant removal, thereby making the process more economically feasible. Fourier transform infrared spectroscopy (FTIR) analysis also shows the cleavage of the chromophore group and degradation of textile wastewater during chemical and oxidation treatment processes.

Recent advances in the development and utilization of modern anode materials for high performance microbial fuel cells.

Microbial fuel cells (MFCs) are novel bio-electrochemical device for spontaneous or single step conversion of biomass into electricity, based on the use of metabolic activity of bacteria. The design and use of MFCs has attracted considerable interests because of the potential new opportunities they offer for sustainable production of energy from biodegradable and reused waste materials. However, the associated slow microbial kinetics and costly construction materials has limited a much wider commercial use of the technology. In the past ten years, there has been significant new developments in MFCs which has resulted in several-fold increase in achievable power density. Yet, there is still considerable possibility for further improvement in performance and development of new cost effective materials. This paper comprehensively reviews recent advances in the construction and utilization of novel anodes for MFCs. In particular, it highlights some of the critical roles and functions of anodes in MFCs, strategies available for improving surface areas of anodes, dominant performance of stainless-steel based anode materials, and the emerging benefits of inclusion of nanomaterials. The review also demonstrates that some of the materials are very promising for large scale MFC applications and are likely to replace conventional anodes for the development of next generation MFC systems. The hurdles to the development of commercial MFC technology are also discussed. Furthermore, the future directions in the design and selection of materials for construction and utilization of MFC anodes are highlighted.

Bilateral fibular hemimelia with recto-vestibular fistula associated with amniotic bands.

Fibular Hemimelia is a rare congenital disorder of deficiency to complete absence of fibula. It has been associated with post axial skeletal anomalies like shortening of femur, absence of lateral rays of foot and syndactyle, polydactyle etc. We report this case because of associated amniotic constriction bands over both the forearm, suggesting amniotic bands may be one of the causal factors of Fibular Hemimelia due to insult to the growing limb bud.